How to Stain Wood Flooring in Kona

Staining Wood Flooring in Kona: A Step-by-Step Guide

Are you looking to give your hardwood flooring a little refresh? Looking to add that spiffy and vibrant look? Staining your wood flooring in Kona can be a fantastic way to enhance the natural beauty of your floors while adding a touch of your unique personal style. With the right tools and techniques, you can achieve stunning results that will leave your guests in awe. And lucky for you that Floor Coverings Hawaii has made this easy guide to make staining your wood flooring in Kona easier than ever! Follow this step-by-step guide to learn how to stain hardwood flooring like a pro.

Preparation is Key! 

Before you start staining your wood flooring in Kona, make sure your hardwood floors are clean and free from dust, debris, and any existing finish. Begin by thoroughly sweeping the floor or using a vacuum cleaner to remove loose dirt and particles. For a deeper clean (that would leave even the most cleanly impressed…), consider using a wood floor cleaner or mild detergent. Rinse the floor with clean water and allow it to dry completely.

Sand and Dust

Once your floor is clean and dry, it’s time to sand the surface. Sanding helps to smooth out any imperfections and opens up the wood’s pores, allowing it to absorb the stain more effectively. Start with a coarse-grit sandpaper and gradually work your way to finer grits for a polished finish. Be sure to sand along the grain of the wood to avoid scratches.

After sanding, clean the floor again to remove any residual dust. Use a damp cloth or tack cloth to wipe down the entire surface, ensuring a clean and smooth base for the stain application. Allow the floor to dry completely before moving on to the next step.

Start Staining

Have you cleaned thoroughly? Are you sure? Well then it’s time to start the fun part: staining your wood flooring in Kona (or wherever you happen to be located). First, it’s time to choose your stain. There are various types and colors available, select one that complements your desired aesthetic. Remember to test the stain on a small, inconspicuous area of the floor before you do it all and realize it wasn’t quite what you had imagined.

With your chosen stain in hand, apply it using a high-quality brush or a lamb’s wool applicator. 

Pro tip: start in a corner of the room and work your way toward an exit to avoid stepping on the wet stain. Apply the stain evenly, following the direction of the wood grain. Take your time to ensure thorough coverage and avoid overlapping strokes (this can result in uneven coloration).

Once the stain is applied, allow it to penetrate the wood for the recommended time specified – typically around 5 to 15 minutes. Check the color periodically to ensure it matches your desired shade. Remember, if you desire a slightly darker color, you can always leave the stain on for a longer period.

Let Dry and Protect

It’s very important to allow the stained floor to dry thoroughly. The drying time may vary depending on the stain type and environmental conditions (especially in a climate like Hawaii). Avoid walking on the floor and placing any furniture until it is completely dry.

To protect your newly stained hardwood flooring, apply a topcoat of polyurethane or another sealer. This will provide durability and enhance the longevity of the stain. These sealers come with manufacturer’s instructions regarding application techniques, drying time, and the number of coats required.

Finally, allow the topcoat to dry completely before using the floor. This is the last step, so be sure not to drop the baton at the finish line! This drying period may take a few days, so be patient and cautious to prevent any damage to your newly stained hardwood floor.


You have successfully stained your wood flooring in Kona, giving it a fresh and revitalized appearance. Now all you have left to do is admire the beautiful transformation you have achieved and enjoy the warmth and elegance that your newly stained hardwood floor brings to your living space!